Wiring optional

Have Any Questions

The electrical wiring in the house is in a state of constant load due to powerful, constantly working electrical appliances. Therefore, worn-out, not designed for modern technology, engineering communications must be changed. In addition, the replacement of wiring allows you to achieve a higher level of electrical safety.

Many houses were built before the 80s of the twentieth century, at that time the load on the wiring was much lower. An aluminum core was installed in the cables – such wires are still in use in many homes.

Wiring must be dealt with for another reason. On average, it serves no more than 25-30 years – even if the copper core is intact, the insulation will collapse, a fire can occur without replacing the wiring.

At first glance, it may seem difficult for you to design the electrical wiring in your house to suit your needs, but our team will be happy to help you with this. We strive to save the client from the need for electrical extension cords, and design everything perfectly!

Signs of old wiring:

01

Where to begin?

Wires that are constantly heated. To identify this problem, no special knowledge is needed – it is determined by feeling. If the electrical network is working properly, it will never heat up during the operation of electrical appliances. At least its temperature does not exceed the temperature of the palm. Too hot wires will tell you about a malfunction.

02

One of the common reasons

Breaker gets knocked out very often. But if the wires do not heat up, then simply replace the breaker with a new one. Perhaps the old model is not adapted to heavy loads on the system and because of this it constantly fails.

03

Aluminum wires

The house has aluminum wires. If we are talking about an old house that is more than 30 years old, then it is rational to replace such wires with more durable ones. The fact is that such wires become very fragile over time, oxidize under the action of ordinary oxygen and moisture in the air and can break at any time.

04

Flickering or dim lights

Flickering or dim lights can also indicate wiring problems. Also, flickering may indicate problems with the switch. In any case, in order to diagnose the problem, it is better to call a specialist.

Our Work Process

For you, we have simplified the process of doing the work. Make your home comply with all California electrical codes. Our team ensures that your home will meet all standards.

1 Consultation Project

Contact us and tell us in detail about the power supply of your home or about your desire to modernize the electrical wiring. We will call you back to discuss your project.

2 Project Planing

One of our technicians will come to your site and inspect the property in detail to determine the best approach to upgrade your electrical wiring. Once the inspection has been completed, we will provide you with a cost and time estimate for everything related to the process.

3 Execution Project

After we sign a contract for your project, we will begin installation work. Upon completion of the work, our specialists will remove coarse debris, and, if desired, recommend a cleaning company to achieve maximum cleanliness of your new renovated home.

About Us

FUSE Electrical Sacramento company consists of team members with electrical experience over 10 years. And in construction and design of power facilities over 500 kV in the countries of the former USSR.

Electric vehicle charging, hot tubs, electrical panels, lighting fixtures and more.